RAW editor
A RAW file holds everything your camera’s sensor recorded, so there’s far more to work with than in a JPEG. The RAW editor develops those files on your own server. You set the light, colour and detail, paint masks to change one part of the picture, and save versions you can always return to. The camera original is never changed.
Open the RAW editor
Section titled “Open the RAW editor”- From your library. Open a RAW photo and choose to edit it. A RAW file opens in the RAW editor instead of the quick editor. Quick edits / external versions in the header switches to the quick editor, and the quick editor’s menu has RAW development to come back.
- From a shoot in Clients. Open the shoot, then choose Open in RAW editor in the shoot’s details. Every RAW photo in the shoot opens together, with a filmstrip to move between them. See Clients.
The first preview takes a moment: you see “Developing the preview…” while your server develops the file.
Find your way around
Section titled “Find your way around”| Part | What it’s for |
|---|---|
| Darkroom (left) | The shoot you’re in, a histogram of the preview, and the Render queue of versions your server is finishing |
| The photo (middle) | The developed preview, with Undo edit, Redo edit, Crop, Hold original and zoom above it |
| Filmstrip (bottom) | Every photo in the shoot, with its stars, an Edited mark and a checkbox for sync and export |
| Inspector (right) | Four tabs: Develop, Masks, Presets and Versions |
Hold Hold original, or hold the backslash key, to compare with the untouched photo. The left and right arrow keys move through the filmstrip.
Develop
Section titled “Develop”The Develop tab works from top to bottom:
- Light: Exposure, Contrast, Highlights and Shadows.
- White balance: Temperature and Tint, or As shot to go back to the camera’s setting.
- Tone curve: drag the curve from shadows to highlights, or pick a Curve preset: Linear, Soft contrast or Lifted shadows.
- Colour: Saturation.
- Detail & lens: Sharpness, Denoise and Lens profile correction, which uses the lens details in the file or the lens database on your server.
- Crop geometry: exact numbers for the crop.
Reset puts the develop settings back. Saved versions stay available.
Crop and straighten
Section titled “Crop and straighten”Select Crop, then drag a new crop frame on the photo. Choose an Aspect (Original, Free, 1:1, 3:2, 4:5 or 16:9), rotate left or right by 90 degrees, and use Straighten to level the horizon. Select Done when it looks right.
A mask limits a change to part of the photo. Open the Masks tab and add one:
| Mask | What it covers |
|---|---|
| Brush | Whatever you paint. Switch between Add and Subtract, and set the Brush size |
| Gradient | A gradual change across the photo. Drag to place it |
| Radial | An oval. Drag from the centre outward |
| Subject | The main subject, found for you on your server |
| Sky | The sky, found for you on your server |
Then set the Mask exposure to brighten or darken that area. Feather softens the mask’s edge, and Invert swaps what it covers. Refine Subject and Sky with the brush; Clear brush refinement removes your touch-ups. Show coloured overlay shows where a mask applies.
A photo can have up to 8 masks. Masks are drawn on the whole photo, before crop and rotation. If subject and sky detection isn’t available, draw a mask instead.
Looks and presets
Section titled “Looks and presets”The Presets tab has two parts:
- Looks: Original, Natural, Vivid, Warm, Cool, Fade, Mono and Noir, with Look strength to dial one back. The thumbnails are a quick guide; the photo shows the real result.
- Your presets: type a name and save your current light, colour and detail settings to use on other photos.
Versions
Section titled “Versions”Your edits are a draft until you save them. The header shows Unsaved changes, Saving… or Saved on your server.
- Save version in the header (or Ctrl+S, Cmd+S on a Mac) opens Save named version. Give it a Version name if you like, and save. It keeps a point to return to, including the photo’s masks. Your server then renders it at full quality, and the Render queue shows its progress.
- On the Versions tab, Save current does the same from the list of versions.
- The version marked Shown in your library is the one everyone sees. Choose Show in your library on another version to switch, or Show the original in your library to go back to the untouched camera original.
- Choosing an older version loads its settings into the editor. Save a version to keep it.
- Versions from the quick editor or another app are listed as Made in another editor.
If a render fails, the queue shows Render failed with Render again. If you leave with unsaved changes, Save your changes? offers Save and continue or Discard changes.
Sync settings across a shoot
Section titled “Sync settings across a shoot”Edited one photo the way you like? Copy its settings to the rest:
- Tick the photos to change with the filmstrip checkboxes.
- Select Sync, then tick what to copy: Light & curve, White balance & colour, Detail & lens, Crop & rotation and Masks.
- Confirm. Each photo gets a new version, rendered on your server.
Brush strokes stay on the photo they were painted on. Shape masks copy across, and Subject and Sky are found again on each photo. Unsaved changes on the photos you sync to are replaced.
Export
Section titled “Export”Select Export to download your work:
- Download this photo saves the current photo as a full-resolution JPEG. Save a version first: unsaved changes aren’t in the download.
- Batch export downloads every photo you ticked in the filmstrip.
Each photo downloads as your library shows it: its current version, or the original when it has none. From a shoot, Proof takes you to the shoot’s gallery to share the results with a client.
Good to know
Section titled “Good to know”- Developing happens on your Frameleaf server, never on Frameleaf Cloud.
- The camera original is kept untouched. Every version can be undone by showing the original again.
- You can rate photos with stars in the filmstrip while you work.
- Which cameras’ RAW files your server can read is listed in RAW support. See Supported formats.
- For JPEGs and quick fixes, use the photo editor. To develop in darktable, Lightroom or another app and bring the result back, see Edit in another app.
© 2026 Frameleaf Inc. All rights reserved.
Frameleaf and the Frameleaf logo are Trademarks of Frameleaf Inc.